Designing a gift is of great importance. A beautifully wrapped box with a pompous or original bow makes a good impact. In the article, we will present several options for how to tie a bow on a box in various ways. To do this, you need to purchase a satin ribbon in the hardware store and wrapping paper in stationery.
There are a lot of options for decorating a gift. This is the simplest single bow, bow with two rings, lush multi-layered. You can make a separate flower or a ball of ribbons and then introduce it into the tying already in finished form. You will also need templates made of dense material and scissors for this. Some people simply put such a finished flower on tape in the middle of the lid, without tying the box itself.
The tape is used in completely different widths. It can be very thin - 5 mm, or you can take it wider - 5 cm. It all depends on the creative idea of the author. If you are trying this simple art for the first time, then check out how to tie a bow on a box in the easiest way.
Regular single bow
The design of such a bow begins with the launch of the ribbon underbottom of the box. Both ends are crossed from the top center or sideways, and the long edge of the tape is once again drawn under the bottom of the box, but in a vertical position. Then a knot is tied at the intersection of the two ends. It remains only to make a simple bow, like on laces.
With this method, there will be no knot on the bottom of the box, the ribbons are even, so that the gift will have a solid foundation. The edges of satin ribbons can be cut in different ways: bevel, corner, evenly. It is advisable to singe them with a lighter or a candle so that the tape does not split.
Luxury bow
Let's look at another way to tie a bow on a box. The tape is divided into two parts. One is used to tie a gift. The ribbon is passed under the bottom of the box and tied in a knot in the center. Then work begins on laying another piece. To make the bow lush, you need to fold the ribbon in turns one on top of the other, as in photo number 3. Then this pack is woven into a knot. To do this, it is placed in the center of the box and tied with the ends of the first ribbon.
The more turns, the more magnificent the finished decoration. It remains only to spread each ring with your fingers and unfold it so that they are arranged in a circle.
Such a fluffy bow can only be obtained from a soft and thin ribbon, if the material is denser, it will bristle and the knot will be rough and thick. This canavoid if you know how to tie a bow on the box in the following way.
Stitching individual elements
This decoration is made separately. Subsequently, it can either be glued to the box with adhesive tape, or tied into a tape in finished form. Such a flower is made from several strips of different lengths. Since the turns are sewn in pairs, you need to prepare two long segments for the bottom, two medium and two short ones for the middle. Consider step by step how to tie a bow from a satin ribbon.
1. Prepare cuts of the desired length. The shortest is the middle, it is presented in a single copy.
2. From each segment, you need to roll up the figure eight and sew the middle with a stitch.
3. Fold the same figure eights perpendicular to each other and sew together. Cross-shaped blanks are obtained.
4 - 5. All parts are fastened together. From below - the largest, then - the average size, from above - the smallest. A part is inserted into the middle, represented by a simple ring. Place it with the seam down so that it is not visible.
6. It turned out a magnificent and durable bow. It can be made from any material, even thick rep or velvet.
Paper version
You can make a beautiful composition from a special paper packaging tape. To do this, you will need a template and sharp scissors. Instead of a template, you can make several turns around the palm. Then it is folded in half and on one side cut off from two sides, as in the photofrom below. This is done so that the central knot is not thick. The ribbon is unfolded so that the sections are in the center, and tied with a thin strip. We look further at how to tie a beautiful ribbon bow.
It remains only to gently straighten all the turns and turn them in all directions. This is done so that they are distributed throughout the circle. At the end, the bow is attached to the gift box or tied into the weave of stripes around the box.
Several similar options
Now you know how to tie a beautiful ribbon bow. But you can decorate the edges of a lush flower in different ways, and it will look more original.
1. A lush paper bow is made, described in the previous section. Next, you need to cut each turn of the ring in half with scissors. If you look at the red sample, then all the edges are notched with corners, forming aster petals.
2. The second version of the pink in the photo has rounded edges with an indentation in the middle. To do this, each end of the tape was folded in half and a corner was cut off on one side and the other.
3. The pale green flower looks interesting. Before tying a bow on a gift, each of its turns in the middle of the ring is cut with the ends of the scissors into several parts, depending on the width of the ribbon. It turns out a chrysanthemum, which looks very impressive on the gift wrapping.
You can come up with your own method of notching the edges. There will be the most unique designsolution.
Original decoration
How to tie a satin ribbon bow? It’s not difficult, and this method looks unusual. After all, the bow is horizontal. You can do it in different ways. The first option is to correctly fold the tape in turns, from the largest to the smallest in the center. It is better that the bow does not spread apart, fasten it with glue or grab it with stitches.
The second option is to compose a composition from separate elements, gluing together segments of different lengths, folded in half. We insert a separately cut piece of the strip into the central coil and tie a bow beautifully. More turns can be cut from a satin ribbon, then it will be more magnificent. Matter of taste and quality of the material.
Composition of several elements
The gift wrapping made of several ribbons of different quality and color looks beautiful. Consider also such an option as tying a bow. From a satin ribbon, wide and narrow, cut into two pieces. For a change, an element from a different material can be included in the creation of the product, as in the photo below. Then three bows are sewn separately in descending order.
Then you need to attach the finished bow to the package.
In the article, we introduced you to the various basic options for tying bows. These skills will be useful not only for those who do not know how to arrange gifts in a box or bag, but also for mothers who want to learn how to tie a bow on their daughter's dress beautifully. So try it, and maybe you will come up with your own way, the most unique and original. After all, this is a creative and interesting process.
