In order to use biogel at home, you need to stock up on certain tools and tools. You will need: biogel, acid-free primer, degreaser, finish gel or clear varnish, UV lamp, and brushes No. 6-7.
Using biogel at home is quite easy. To do this, you just need to go through certain stages of nail processing step by step, which will be discussed further. Initially, you need to take care of the cuticle, it is lubricated with oil and gently pushed back with a special spatula. Then you need to give the nails the desired shape with a nail file, sand the surface of the plates (for this, a buff nail file is used). Next, you need to remove the resulting dust and go through the degreaser.
The next step involves the use of a primer. It must be very carefully applied to the surface of the nail plates, without affecting the skin. After that, you can apply biogel on your nails at home.conditions. The first layer is applied very thinly, while it should seal the edge of the nail. For drying, 1-2 minutes exposure to an ultraviolet lamp is enough.
Now you can apply the second layer, which dries in the same way. In total, biogel coating at home involves 3-5 layers, but the woman herself can choose the most suitable application thickness.
When all layers are applied and the last one is dry, it's time to fix the result. To do this, you can use a finish varnish or a regular colorless varnish. The only difference is that the first is dried with an ultraviolet lamp, and the second in the usual way.
You can use biogel at home both transparent and colored. In the first case, it is possible to apply ordinary colored varnish over the strengthened nails, as a rule, gels are not sensitive to the effects of acetone. The second option eliminates the need to additionally use conventional means.
As you know, nail extension involves correction after 2-3 weeks, which is a necessity due to the natural growth of nails. You can carry out this procedure yourself. To begin with, the regrown strip of the nail is degreased and polished (for this it is better to use a special manicure apparatus). The treated strip is gradually filled with gel, each layer is dried. You should make a slightly convex shape, which willmerge with the old coating. The most important thing is to make sure that there are no voids.
Using biogel at home to create a beautiful manicure is quite simple, but its removal is somewhat difficult. As already mentioned, most of these products are not sensitive to the effects of acetone, so the coating will have to be cut off. For this, a nail file with an abrasive of 100-150 grit is used. To speed up the process, you can cut the nail a little. Sawing does not take much time, since the biogel itself is soft. In general, the procedure takes about 15 minutes.
After the removal of artificial nails, natural nails require special care. They need to be lubricated with cosmetic or any vegetable oil (apricot, olive, etc.). You need to rub it with massage movements, and then polish your nails with a suede polisher.