The new generation of gel polishes are reluctant to dissolve with special liquids, and therefore many people want to cut off the coating. It is not always pleasant to perform this procedure because of the sensations that are transmitted by rough abrasive files. In addition, you can injure the delicate skin near the cuticle or accidentally saw through the side roller. And files of finer abrasiveness can cause such friction that it becomes hot. And it will take a lot of time to remove the gel with such a tool. It is much more convenient to do this with a special cutter.
There is a special ceramic nozzle for the manicure device, which provides a gentle removal of the material and does not heat up. This is an expensive thing, its price ranges from 600 to 1000 rubles, depending on the manufacturer. But you still need to buy additional equipment for it.
What is the name of the device that removes gel polish
All manicure devices are divided into two large groups: professional and amateur. They differ in power: professional ones are powered by the mains and have a power of 45 W, amateur ones are powered by batteries and havepower 18 watts. At the same time, the rotation speed of the cutter can be the same and reach 25,000 revolutions per second.
If all professional models have standard nozzles and a large selection of them for various operations, this cannot be said about household appliances. You can only buy a new cutter to replace a failed one. Unfortunately, for this reason, they often stop using household manicure machines.
In a store, a gel polish remover can be called differently: a cutter, a milling cutter, a machine, a drill. The essence of this does not change. For productive and fast work, you need at least 30 watts of power, but 60 watts is better. This will come in handy if you eventually want to do a hardware pedicure. A set of professional cutters must necessarily include a ceramic nozzle, a reverse function and a speed switch relay. And the foot pedal will greatly facilitate the work and free your hands.
Ceramic burr
Only a special cutter is suitable for removing gel polish with a machine. It should be made of ceramic, have notches in the form of a corn cob and be of high quality. When working with such a tool, heat transfer is minimized and the likelihood of burns disappears.
In order not to buy a fake, you can focus on the price: good cutters cost about 10-15 dollars. Many companies produce such nozzles, but it is better to choose those that are also produced by professional devices.
Safety instructions
Beforeremove gel polish with the device, you should read the instructions:
- Before turning on the device, a visual inspection is carried out to detect damage in a timely manner. If they are present, the device cannot be turned on.
- It is necessary to insert the nozzle until it stops, only then turn on the device.
- Periodically, during operation, turn off the power and cool the machine. Failure to do so will result in overload and damage to the instrument.
- If unusual vibration occurs, turn off the unit and call a repair person.
- Do not operate the machine in high humidity or with wet hands.
- It is necessary to exclude the heating of the electric wire from the radiator or direct sunlight.
- It is necessary to exclude contact of the device with chemical compositions.
In the process of work, you have to change nozzles. This should be done with the power off.
Rules for operating the machine
When operating the machine, certain rules must be observed to avoid injury. You need to familiarize yourself with them before removing the gel polish with the machine:
- The rotation speed is set on the control panel. To do this, use the regulator, smoothly switching it.
- When working, control the rotation of the cutter with a pedal. By pressing it to the stop, the speed set on the relay is reached. To reduce it, you can loosen the pressure on the pedal or switch the relay.
- Change the direction of rotation in three steps:
- Removefoot off the pedal.
- Wait for rotation to stop.
- Switch rotation direction.
During operation, the nozzle rods may become damaged (rust, dirt). Continued use will wear out the motor bearings.
Store the device with the rod inserted and do not allow it to be turned on without a nozzle.
Gel Polish Removal Instructions
Before removing the gel polish with the device, check its condition, set it to a low speed, connect the pedal and insert the ceramic nozzle into the clamp. The working elbow should lie on the table - this will prevent overexertion of the arm and, as a result, careless erroneous movements.
- Work starts from right to left from one to the other finger. The cutter should not be turned too far to get to awkward places. Turn your finger.
- They work with the middle part of the cutter, making movements from top to bottom. The direction of rotation at this moment should coincide with the movement of the hand.
- The nail does not stop at one point, the cutter is moving all the time. No effort should be made.
- Having removed the material from the center of the nail, go to the side parts. They bend the roller and remove the coating, slightly tilting the cutter so that it works with the upper part - there are smaller notches.
The video shows how to properly remove gel polish with a machine. If the operations are always performed in the same sequence, there is less chance of injury asmaster and his client.
Pro Tips
Experienced craftsmen point out the subtleties of the process. Of course, in order to learn how to work quickly and efficiently, it is not enough just to understand how to remove gel polish with a machine. Need practice. Here are some tips to help beginners:
- To avoid overheating of the nail plate, perform stroking movements with a cutter. She moves in and out of the nail.
- When overheating of any area should go to another nail, and then return to the first.
- The movements of the hand with the working device should be only in the direction of rotation, otherwise the cutter will jump off the nail and may cause injury.
- Cutters are similar, and it is easy for a beginner to confuse them. Keep the ceramic burr separate.
- Cleaning the machine daily with a brush and a soft cloth will keep it in good condition.
Disinfection and sterilization
A gel polish remover can become a breeding ground for infections if sterilization is neglected. In salons, glasperlen sterilizers or dry-heat cabinets are used. At home, you can use the method of soaking the removable parts of the device in a disinfectant solution, which can be purchased at a specialized medical store. Instructions and exposure time are indicated on the package.
The tool, cleaned and washed under running water, is wiped off and placed in a kraft bag. Then the oven is heated to 180 degrees and the kraft bag is placed in it for fifteen minutes. Store the tooltaking out. It remains sterile for thirty days.
How not to damage your nails
Many are concerned about the question: how to remove gel polish from nails with a machine and not damage them? During the operation of the cutter, gel polish is removed layer by layer from the nail. First, the top is removed, then the color layer and the base coat remains. In some cases, it is also removed, but this is extremely rare.
The master focuses on the base coat, which usually has a slightly matte transparent look. This layer signals that it is time to stop stripping. If, nevertheless, it needs to be removed from the nails, this can be done with a file and a buff or, if the material is soluble, using an acetone-containing liquid.
The most dangerous place where traces from the cutter can remain is the cuticle area. The nail is weaker here, and even one careless movement can leave a mark, which then will grow back for a long time. Therefore, some prefer to work at the cuticle with the upper part of the cutter, where the notches are very small.
Where to start for a home master
When purchasing a set for applying gel polish, you should also purchase a device for removing it. Often the cost of the apparatus and cutters for it exceeds all other materials and equipment. But it is important to remember: the purchase is made once, and it is very difficult to do without the device.
There are professional courses that introduce you to the basics of the device. At major exhibitions dedicated to beauty salons, eminent masters advise for free. Beforeget started, it is better to acquire knowledge. This includes machine handling, coating, and various designs.
Then for a beginner there will be no difficulty in how to remove gel polish with a machine at home.