A modern girl, first of all, watches her hands, because they are her calling card. Now the technologies of hardware manicure are pushing back a simple ordinary one, because they are not only technically more modern, but also save a lot of time on creating a manicure.
What is a hardware manicure?
The main thing that distinguishes this type of manicure from the usual one is the technique of its implementation. Hardware manicure is performed step by step only on dry nails. They do not need to be steamed first. Also, the cuticle is not completely removed, only the dead parts of it should be removed.
You can perform a hardware manicure at home step by step, or you can turn to specialists. This procedure uses a machine specially designed for this. It has several nozzles and the ability to perform several operations. Regarding the harm or benefit of the measures taken, we can say that they will be more gentle,since the skin of the fingers is minimally disturbed.
Hardware manicure step by step: what nozzles are used?
A very important point when choosing tools and accessories for hardware manicure is the selection of a milling machine. Its quality and functionality play a leading role. However, in second place here is the number of nozzles in this very machine and their quality. In general, all nozzles are usually divided into two large categories:
- cutters;
- drills.
In this case, nozzles can be bought separately, but their parameters must match your typewriter. The material from which they are made plays a key role in their classification. Also, depending on the material, the scope may differ.
Ceramic tips
This type of nozzle is made by baking a special glue and an abrasive mixed with it. In this case, the abrasive can be of different sizes, which can also distinguish nozzles from each other. If you use this type of nozzles, then you will have to clean them periodically, since the recesses in their surface tend to clog.
Ceramic nozzles work with the skin, it is not recommended to carry out any procedures with the nails. Also, in no case should these nozzles be used to clean the arches under the nails. Otherwise, you risk ruining the nail.
Diamond bits
This type of nozzles can be divided into two types: sintered andbesieged. They also have a different scope. Sintered can't be used on leather and gel, but are very good on acrylic. It needs to be cleaned in time. Deposited nozzles have proven themselves very well when working with gel, acrylic and when processing a nail. However, they didn't perform well on leather due to their lack of sharpness.
Metal cutters
Technology of hardware manicure step by step involves the use of metal cutters. They are usually made of hard metal. Their distinctive feature is that this nozzle can rotate only in one direction. They are used to remove rough and keratinized skin, as well as to reduce the thickness of an acrylic or gel coating. It is also allowed to remove corns with them and pre-treat the nail surface.
Silicone polishers
The technique for performing hardware manicure step by step also involves the use of silicone polishers. They perfectly polish gel and acrylic, and they can also be used to make the skin silky.
It will be very good to use this tool if you need to remove the gloss from the nail plate, and then carry out the extension procedure. Due to the softness of silicone, all procedures are painless.
Step-by-step hardware manicure
Hardware manicure for beginners step by step is not so difficult. The main thing before starting to have a goodtheoretical training and a little imagination. If you have purchased a machine and nozzles for a hardware manicure, and you have all the necessary tools, you can begin to put your knowledge into practice.
The first step is to prepare the fingers. To do this, they are treated with a softening agent. This makes it possible to soften the cuticle and make its removal painless.
The second step will be the processing of the cuticle and skin around the fingers. To do this, you can use a diamond nozzle. The key to this is that you must be mindful of how you feel during this procedure.
The third step is to give the nail some specific shape. To do this, you can use a cylindrical or trapezoidal cutter. It must be remembered that there should be at least 2 mm of the nail above the bundles of the fingers.
The fourth step will be polishing, which is the most difficult process for beginners. Do not bring the edge of the polisher close to the nail. The nozzle should not be held in one place for more than one second.
The last, fifth step, will be the treatment of hands with oil in order to remove the remnants of the nail. The oil should be well absorbed, and its residues can be removed. After that, the nails can be painted.
Devices and tools for hardware manicure
In general, a full-fledged device for performing hardware manicure should be multifunctional and have everything in its kitnecessary accessories. The kit includes the machine itself and a variety of attachments. The principle of its operation is the same as that of a dental drill.
It would be best if your device is equipped with a built-in mini-vacuum cleaner. This will help avoid inhaling the dust generated during nail polishing.
In addition to the tools, you will also need oil and an emollient for rough skin on the hands. If necessary, you can use hand cream.
At the request of the client, after the procedure of hardware manicure, you can use additional products for the care of hands and nails. Some time after the manicure, you can correct it with a regular nail file.
Advantages and disadvantages of hardware manicure
The technology for performing hardware manicure step by step has a number of its own features, which can be both its advantages and disadvantages. Firstly, this type of processing has shown itself to be the most gentle. It is also very safe and will protect you from minor cuts and cracks that are almost inevitable with a regular manicure.
Hardware manicure step by step is able to slow down the growth of skin treated in this way, and this will prolong the period of re-conducting these events. This type of manicure is very well suited for application on dry or uneven nails.
Hardware manicure step by step also has negative points. First of all, this is the appearance of a burning sensation after the nozzles. Due to inexperiencethe risk of damage to the nail plate itself and the appearance of stripes on it.
Hardware manicure is not suitable if initially the nails are in a very neglected state. Also, the quality of manicure and the achievement of the desired result directly depend on the number of nozzles available. In this case, you will have to purchase the entire set of tools at once.
Some tips for performing hardware manicure
Hardware manicure step by step is not recommended for people with thin or soft and elastic skin. Also, the use of this procedure is not desirable if the cuticle grows very strongly on the nail.
Now the technology of hardware manicure is widespread not only in beauty salons or nail salons. Its implementation is quite possible even at home, having the most minimal kit for nail care and manicure. However, this achievement should not be abused and the procedure should be carried out very often, because in addition to the benefits, it can also have a negative effect on your nails, which will significantly spoil their appearance.
Those who are not confident in their abilities or have a negative experience of doing a manicure at home, as well as girls who have to go to a responsible event, it is probably better to resort to the help of professionals and take advantage of their useful advice.
