Aesthetic modeling of the face and body is resorted to for various reasons. Someone is not satisfied with natural data, someone with age-related changes, and someone was injured, which ruined their appearance. There are many ways to do this now. Each has its pros and cons.
Face modeling
Generally speaking, this is a change and correction of objects located on the face. In a more accessible language, this is a set of procedures for changing the appearance and rejuvenating the face, which is aimed at changing the contour of the face, the shape of the nose, eyes and cheekbones. Modeling of the face and body can be carried out by non-injection methods:
- Massage.
- Manual Therapy.
- Makeup.
Injectable:
- Fillers.
- Hyaluronic acid.
- Botox shots.
- Lipofilling.
Surgical:
- Facelift.
- Rhinoplasty.
- Blepharoplasty.
- Removing Bish's lumps.
- Bullhorn.
- Introduction of skeletal threads under the skin.
- Browlift.
- Canthoplasty.
- Canthopexy.
- Liposuction.
Naturally, surgical methods provide the most radical changes. Only with their help you can change the appearance beyond recognition. But with the help of injections and massages, you can maintain a young face oval for a long time.
Manual Therapy
The basis of the work of a chiropractor is to work with the patient's spine and body only with the help of hands. Do not confuse manual therapy and massage. Massage is designed to relieve muscle tone, and manual therapy is to disperse the lymph and direct its flows in the right direction. It should be practiced by a person with a medical education who perfectly knows human anatomy.
The main focus of this technique is on the treatment and correction of diseases of the musculoskeletal system and internal organs. However, with the help of this lymphatic drainage technique, a person can be relieved of edema caused by local fluid stagnation. In this way, you can make the oval and contours clearer, which will have a rather strong effect on the appearance for the better. Also, with the help of manual therapy, you can make the stomach flatter, remove skin irregularities and tighten muscles. This type of procedure is called "aesthetic manual face modeling".
Massage
This method has proven itself as a prevention of skin aging. Massages are of the following types:
- Relaxing.
- Sporty.
- Medical.
- Anti-cellulite.
- Modeling.
The latter is designed to tighten the contours of the face and body. Facial modeling by massage is performed in several ways:
- Spanish by Enrique Garcia technology.
- Italian by Deborah Brici technology.
- Moroccan.
- French by Pascal Coche technology.
You can start modeling your face with massage from the age of 30 as a prevention of signs of aging, because it is from this age that lymph and fluid begin to stagnate in the tissues due to muscle spasms. This provokes new wrinkles and sagging of the contour. According to reviews, after a course of facial massage, the skin looks more radiant, and the contour is indeed slightly tightened. There are practically no contraindications for this method.
Sculpting creams
Don't discount facial contouring creams. They will not give an immediate effect, but as a measure to maintain youth, they will fit perfectly. Disciplined daily facial skin care brings good results. Modeling, or lifting effect, is achieved using the following components in creams:
- Lipolitics that burn fat locally, such as phosphatidylcholine.
- Stem cells - activate the synthesis of collagen and elastin.
- Low Molecular Weight Hyaluronic Acid helps in deep hydration.
- Vitamin C is an antioxidant, a substance that prevents skin oxidation.
- Coenzyme Q10 is an antioxidant.
- Peptides are a protein formula that is designed tostrengthen cellular connections.
- Carnauba wax instantly tightens the skin of the face.
- Microdoses of insect venoms cause an effect similar to that of botulinum toxin.
Many brands develop their own complexes, the composition of which they keep secret. The cost of really working modeling face creams usually starts from 5 thousand rubles.
Correction makeup
Do not underestimate the help of makeup. Any girl can slightly correct her appearance with the help of cosmetics, and professionals in this matter work real miracles. The fashion for aggressive contouring was introduced by Kim Kardashian, posting her reincarnations on social networks.
The secret of such contour modeling of the face is simple: if something is brightened, it will become larger, and if something is darkened, then it will become smaller. By applying color correctors in the right parts of the face, you can quite change its shape. They are in any line of professional makeup. Every woman has her own colors. Remember, liquid correctors will look brighter on the face than dry ones. They can change the nose beyond recognition, make the contour of the face different, even “draw cheekbones” where the girl has chubby cheeks.
But don't forget that aggressive facial modeling with make-up looks perfect only in the photo and from afar. Up close, all this “ton of makeup” will be visible to the naked eye.
Fillers
The purpose of this procedure is to fill the voids with fillers. To face modelingfillers can also include the introduction of hyaluronic acid, but a more viscous and dense structure. The most popular drugs for this purpose are as follows:
- Teosyal Ultimate.
- Perlane.
- Surgiderm.
- Juvederm Voluma.
Fillers are injected into the subcutaneous fat layer, which becomes thinner over the years. The procedure is done under local anesthesia for about 20 minutes. The effect lasts for about a year. Fillers can not only fill wrinkles, but also increase the cheekbones, lift the nose, sharpen the chin.
Lipofilling can be attributed to the same type of correction. This is injection instead of fat fillers. It is taken from the client from some parts of the body.
Hyaluronic acid
Most of this substance is known for its cosmetic action to increase the lips. But it is also used for facial modeling. Hyaluronic acid has the ability to attract and hold water molecules that exceed its mass by a total volume of 700 times. This property allows you to add volume in the desired area. Knowing the anatomy of the face, in this way, it can be changed quite a lot, as well as remove signs of aging.
Hyaluronic acid is present in the human body from birth. But in infants and children, it is produced much more than in the elderly. Therefore, their skin becomes so sluggish, dull and lifeless. Because of this, the cheeks fall over time, but if you add volume to the cheekbones, they will rise due to this.
Also, with the help of injections with this substance, you can give the face complete symmetry, which with ageinvariably lost.
Hyaluronic acid stays in the skin for about six months, and then it is absorbed and excreted from the body completely, turning into carbon dioxide and water. This is both her plus and minus.
Botox
Botulinum toxin is essentially a poison. Its introduction locally in microdoses causes temporary paralysis of the muscle. This property of his was very useful in cosmetology.
With the help of injections of preparations based on this toxin, wrinkles are often eliminated. Another area of its application is the modeling of the contour of the face without surgical interventions. The result is to remove the "crow's feet" near the eyes and smooth wrinkles on the forehead. Botulinum toxin injections can achieve the following effects:
- Reduce the face in the cheek area.
- Lift the eyelids.
- Prevent puffiness under the eyes.
- Remove the hypertonicity of the masticatory muscles, which entails a change in the shape of the face from square to oval.
In addition to the most popular drug Botox, there are also Dysport, Xeomin, as well as many lesser known analogues. Just because they're less known doesn't mean they're worse. But still, according to reviews, "Dysport" needs a little more in quantity.
Surgery
This is a facial modeling using a full operation under anesthesia, during which native tissues can be removed and its analogues inserted under the skin.
The most requested plastic surgeries are facelifts and rhinoplasties. If notIf congenital anomalies and consequences of injuries are to be eliminated, then rhinoplasty is not performed until the age of 18. It costs an average of 200 thousand rubles. A facelift can be done with or without implants that replace the missing volume. If there is no such need, then they do the usual circular facelift - rhytidectomy. The price of the procedure depends on the complexity of the work (from 100 thousand rubles to 500 thousand rubles). Both types of operations are performed under general anesthesia and last about 2 hours.
Contraindications to all plastic surgeries are as follows:
- Acute diseases.
- Skin diseases.
- HIV
- Oncology.
- All diseases that cause bleeding disorders.
- Infectious diseases.
In addition to rhinoplasty and facelift, they reduce and change the contour of the lips, nose, eyelids, change the shape and location of the eyebrows.
Computer simulation program
Before starting modeling, any competent specialist will definitely find out how the changes will affect the appearance of the face as a whole. Now there are many computer programs that allow you to see all these changes even before the procedure in real time on the screen.
One of the most popular programs for working with 3D images is 3D MAX. But more convenient and professional programs have been created for plastic surgeons. One of them is Crisalix. It allows you to demonstrate to customers their new look. In such programsyou can see how the face or body will change if you perform such modeling manipulations with them: liposuction, injection of fillers, and others. You can see the changes not only on the laptop screen in 3D, but even in 4D with the help of virtual reality glasses. To do this, you need to purchase such a program and a 3D scanner for it in order to scan the patient's body or face.
Threads
The introduction of threads under the skin to create an additional frame that maintains the contour of the face in a normal state is called reinforcement. Threads are introduced both from medical metal and from polydioxanone, which simply dissolves over time. After resorption, the threads are replaced by their own fibrous tissue and collagen fibers.
This type of oval correction is only suitable for those who do not yet have severely stretched skin. The procedure itself is the prevention of such stretching. In addition to raising the oval of the face, reinforcement can eliminate the following problems:
- Nasolabial folds.
- Purse-string wrinkles.
- Forehead wrinkles.
After 18 years old, there are no special age restrictions for the procedure, but before 30 years old, it makes no sense to resort to it. Up to 30 years, injection methods are sufficient. Reinforcement is carried out under local anesthesia for about 40 minutes. Hospitalization is not required. The effect is enough for a period of 2 to 4 years, and the cost depends on the number of threads introduced. One costs about 2 thousand rubles (the price may vary in different clinics). Often 10 threads or more are required.
Reviewson modeling the oval of the face with the help of such threads are mostly positive. Patients report excellent value for money.
Which method to choose
It all depends on the degree of the problem to be solved and the age. It is quite enough for young girls to regularly take care of themselves with the help of cosmetics, and a little later add massages and peelings from a beautician to their care. After 30 years, you can think about more radical methods, such as injections. Closer to 35 years, only threads will help many to return the girlish oval of the face. After 40-45 years, only surgery will help in the struggle for youth.
Women's opinions
In their reviews, all users note that any facial modeling procedures last six months or a little longer, and then they need to be carried out again. This entails new financial costs. And so on until you stop. After the refusal of procedures, the skin of the face quickly acquires an age-appropriate appearance, but with the help of alternative methods (massage, masks, creams), it no longer improves. Therefore, before the very first procedure, women are advised to think about whether it will be possible to carry out such an intervention regularly twice a year.
Clients praise filler modeling, as well as blepharoplasty, rhinoplasty, canthoplasty.
There are mixed opinions about the use of threads. For some, this procedure was suitable, for others it caused allergic reactions.
All women are advised to regularly care for their face and performyouth-supporting procedures (massage, use of high-quality medical cosmetics) to delay the application of drastic measures.
