Today, many girls, for whom the beauty of hands is important, tend to learn the basics of the art of manicure on their own. It is more difficult for them than for professional craftsmen, because they have to look for answers to many questions on their own. Yes, and for those who received a diploma of a nail master, it is sometimes difficult to master the work with some material.
Currently, a huge number of products are being produced. Technology may differ from manufacturer to manufacturer. That is why situations arise when the usual proven technique does not bring the results that one would like to count on.
Our article is devoted to one of those issues that cause a lot of controversy in the beauty communities. Do I need to remove the sticky layer from the base? Most professionals answer this question in the negative, but if everything was so clear, there would be no disputes at all.
What is a sticky layer
Many gel materials, which include bases, varnishes, building and strengthening gels, painting paints and top coats, polymerize in UV or LED rays to form a stickylayer. Why is this happening? During drying, the substance passes from one state of aggregation to another, a crystal lattice is formed. The process is accompanied by the release of a dispersion liquid, which is the very stickiness that can be seen on the surface. In some cases, heat is also released - it is because of this that materials are said to be baked in a lamp.
Does a sticky layer form on the base
Many people know that there are tops without a sticky layer. But it is unlikely to find a base with such a feature on sale.
Why is that? Because in some cases, the stickiness of the top interferes with the master. A non-dispersive material is used for complex designs. For example, they are painted with rhinestones and broths. Removing stickiness from an inhomogeneous surface is extremely problematic.
The base is covered with varnish, gel or top without fail. The master does not have to wipe the material lying in the thin cracks between the rhinestones and opals. Even if stickiness is not needed, it is quite easy to remove it from the base. Therefore, almost all the bases on the market are not without this stickiness. When buying a new material for yourself, be sure: after drying, you will find stickiness.
Do I need to remove the sticky layer from the base
But the dispersion layer is not only a side effect, otherwise manufacturers would have figured out how to get rid of it long ago. The sticky layer also serves to link the layers together. The coating holds better when applied to a dispersion substrate. So is it necessary tobases to remove a sticky layer? It turns out that it is an integral part of the right technology.
But we have not yet received an answer to the question of whether it is necessary to remove the sticky layer from the base. It's too early to draw conclusions. But remember that if there are no "aggravating circumstances", you can simply ignore it. After applying the base and drying it, just move on to the next step.
Are there any exceptions
Experienced craftsmen assure that there really are exceptions. It happens that the sticky layer from the base needs to be removed. Let's remember that this is usually not required, but sometimes it is simply necessary. Let's consider some situations when it is better to get rid of the dispersion layer.
Before sawdust
Thick bases are used not only to provide adhesion between the nail bed and the decorative coating. With this material, you can align the nail plate and even complete the missing corners.
Of course, to get perfect highlights, you need experience, skill and theoretical knowledge. For a beginner craftswoman, the result may be the opposite: the base will not level the surface, but on the contrary, it will distort it. Material that is not properly laid out can form bumps and bumps when baked in the lamp. What to do in this case? Is it really necessary to carry out a complete dismantling and start all over again?
Fortunately, the situation can usually be corrected with a file. Tubercles and thickenings are easy enough to polish well, removing excess volume. But before picking up a file, you need to remove the sticky layer from the base. ATotherwise you will get dirt, you will not be able to do the job quickly. Processing a sticky surface with a file is a waste of time. Wipe the nail, getting rid of the dispersion layer.
Lacquer and base of different brands
Some people think that it is absolutely impossible to use products of different brands. But if earlier such an idea was quite common, today most masters assure that this statement is greatly exaggerated.
And yet there is some truth in it. It happens that when using products from different companies, the varnish simply rolls off the base. Before you finish painting the nail, you may notice a bare end or a gap near the cuticle. Let's not argue with the fact that some products are simply categorically incompatible. But in most cases, just wiping your nails with a clinser is enough.
So, an important point that is also worth remembering: after the base, you need to remove the sticky layer if the varnish and the base of different brands do not work well together. As a rule, this trick works well. But it also happens that simply wiping is not enough. Then a well-dried base should also be walked with a soft buff. There can be no unequivocal recommendations. Experiment to find out which method works best for your materials.
Low-pigmented liquid polish
Unfortunately, no one is immune from unsuccessful purchases. But if the purchased varnish spreads, forms bald spots and does not give a normal density even after 2-3 applications, do not rush to say goodbye to it. Just try to shootsticky layer after the base. Often this is the only way out. It is quite possible that the varnish you like will still work.
This statement is especially true when it comes to Chinese-made budget materials.
Base-camouflage
In the lines of many brands you can find not only transparent bases, but also pigmented ones. It is very convenient to work with camouflage coatings, especially if you plan to do a jacket or manicure in nude shades. It is enough to apply the base, and then just cover it with top.
Drawing on camouflage base
But if the design also includes drawings with watercolor or acrylic paint, or creating a sketch with a simple pencil, the base will not only have to be wiped off the sticky layer, but also treated with a buff. Otherwise, the paint will simply roll off, and the liner or pencil will not leave a trace.
Strengthening nails with a base without polish
Let's consider one more particular case. Many girls who do not like or simply do not want to do a color coating, but want to have well-groomed nails, resort to strengthening.
Do I need to remove the sticky layer after the base in this case? No, this technique is not an exception. Just cover the dried base with top.
Base before building up
Many thick bases are suitable for treating nails before gel extensions. If you are using a material that needs a base coat, feel free toapply it directly to the stickiness. In this case, strength will only benefit, because the sticky layer will work like double-sided tape.
How to remove the sticky layer from the base
We looked at some special cases when it is necessary to remove the dispersion layer, and also talked about when it should not be done. If you are faced with a situation in which it is better to get rid of stickiness, you will probably wonder what is the best way to do it.
The ideal option is a special liquid. It is not so expensive, so that the savings on it would be appropriate, and its consumption is small. A pack of lint-free wipes will also last a long time. These are the best materials for removing stickiness.
But it happens that the right remedy ended at the most inopportune moment. You can replace the clinser with an alcohol pharmacy tincture, cologne and even ordinary vodka. But in this case, some side effects may appear, for example, clouding of the base, acquiring a yellowish or gray tint.
You can wipe your nails with nail polish remover, but you need to do this very quickly so that the reaction does not start. If you hesitate, the base may peel off.
What not to do
The main thing to avoid is experiments on your own hands. If you want to see how materials from different brands will work, practice on tips. Be sure to make a note on the tips if you think that it is better to remove the stickiness from the base!
Do not use household chemicals to remove stickiness andmedicines. With any substitutes for professional tools in general, you should be especially careful.
Never use cotton pads, sponges, napkins, paper and ordinary cotton balls to remove stickiness. Any material that leaves a pile is detrimental to a manicure. In extreme cases, lint-free napkins can be replaced with paper handkerchiefs. But working with them is much more difficult.
So, we have found answers to the question of whether it is necessary to remove the sticky layer from the base, when to do it, and when not, and also considered what materials should be used for this.