Very often in jewelry stores you can see white gold items. These are chains, rings, cufflinks, earrings and any other jewelry. This metal, like ordinary gold, belongs to the noble. It consists of some mixture of nickel, palladium and copper. From above, it is covered with a small layer of rhodium, which gives the products their unique brilliance and protects the surface from various kinds of mechanical damage. However, over time, this alloy loses its original appeal. How to clean white gold, we will tell further.
Is it possible to make it at home?
Sometimes after purchasing a piece of white gold, there is a need to clean it. About the spoiled appearance of your jewelry signals. For example, it has darkened, turned yellow, or lost its original luster. At the same time, it is quite possible to restore the original beauty of the product both independently and under the strict guidance of specialists. But beforeclean white gold at home, you need to determine the nature of the contamination.
For example, if your clothes become sticky to the touch or covered with a slight matte coating, this is easy to fix. How to do this, we will describe below. But if your products have acquired a yellowish tint, this may indicate a violation of the integrity of the rhodium layer. In this case, you will not be able to correct the situation yourself. It is possible to restore the protective shell only in laboratory conditions. This means it's not worth the risk. And the ideal option would be to take jewelry to jewelers. If you clean it yourself, you run the risk of further aggravating the situation and completely ruining the products.
Giving everything to specialists is worth it even when your jewelry has turned black. This may indicate the effect of acids or their vapors on jewelry. To restore the color in this case, professional and gentle polishing is recommended. But how to clean white gold at home? To do this, use our simple tips.
What products can I use for cleaning?
To clean white gold at home, it is quite possible to use the following chemicals:
- laundry soap;
- baking soda;
- cleaning powder for washing dishes;
- toothpaste;
- ammonia.
Please note that soap, baking soda and detergent are generally mild and gentle on products, but even with them you need to be very careful. Veda top layerThe described alloy is extremely delicate and easily damaged. Therefore, using these products, you need to clean with smooth and unhurried movements.
To clean white gold earrings, as practice shows, you can use toothpaste or dentifrice powder. However, this also needs to be done carefully, as toothpaste has a moderate effect on the coating of products. With sudden movements, it is quite possible to scratch the surface with very small abrasive particles of the paste. The same applies to cleaning with ammonia. It has a strong effect on products.
Use a gentle soap solution
To work you will need some liquid soap or shower gel. Take some not too deep container, pour a little warm water into it and add soap or gel. It is recommended to lower your jewelry into the finished solution.
Next, cut off a piece from a regular dish sponge and start cleaning. After you finish doing this, rinse the jewelry with plain tap water. As you can see, everything is simple. And even though it may not be possible to clean white gold the way a professional does, it will still take on a more attractive look.
Make a paste with baking soda and water
To prepare a special cleaning paste, you need to take baking soda, a container and distilled water. We recommend pouring a little soda into the container, slowly pouring water into it and stirring.
You should end up with a soda paste. Take a container with the resulting paste and with a toothbrushGently clean your white gold ring or other jewelry. As we have said, they should not be rubbed hard. Otherwise, you risk being left without a protective coating. You should also not intensively rub places with inlaid stones. Pay attention only to the golden surface.
Clean with baking soda, water and filtered water
Answering the question of how to clean white gold, it is worth mentioning another option with soda. To do this, take about 1.5-2 teaspoons of baking soda and pour it into a container of filtered water. Then bring the solution to a boil, turn off the heat and dip the jewelry in the water for about 10-15 minutes.
For best results, remove item and wipe with a microfiber or flannel cloth.
After this procedure, your rings, chains or earrings will shine and be well cleaned. However, it should be noted that this method is not suitable for products with stones, diamond chips and other inserts.
Set shine with gel
White gold, like some other precious metals, can be cleaned with dishwashing, shower or laundry gel.
To do this, first heat distilled water. And then pour a little gel into it (just a couple of drops are enough). Lather slightly heated water and lower the decoration there. You can use a soft-bristled toothbrush for this cleaning.
After the procedure, remove them and rinse under running water.
How to clean white gold at homefast and efficient
Reviews that housewives leave about different methods of cleaning jewelry, claim that hydrogen peroxide is the most inexpensive, quick and effective way to clean gold.
For this you will need to take a shallow container. Add to not half a teaspoon of hydrogen peroxide, a few drops of liquid soap and a couple of drops of ammonia. After all the ingredients are poured into the container, it is necessary to mix them thoroughly. And then put your jewelry into the solution, leaving them there for 1-1.5 hours.
After this time, remove the jewelry, rinse them under running water and pat dry with a cotton cloth. Glitter and radiance are guaranteed.
Toothpaste use
Judging by the responses, many people also like cleaning their jewelry with toothpaste. According to experts, this method can be used in the presence of small darkening on rings, earrings, bracelets or chains.
For him, you need to take one piece of laundry soap and grate it on a fine grater. And grind about half of the whole white chalk into powder (you can use a mortar for this).
After that, all dry ingredients must be lowered into a container. Add there about a quarter of the tube of toothpaste and 10 ml of petroleum jelly. Add 50 ml of warm water and mix thoroughly.
Treat all tarnishes with this product, and finally wipe the jewelry with a clean cloth. If it is still sticky (often due to Vaseline),rinse it with alcohol or vodka, and then rinse with plain water.
Now you know how to clean white gold at home quickly and efficiently. With the photo suggested in the article, this procedure will be more understandable.
We wipe products with alcohol
Another simple option for cleaning gold items is to use ammonia. To do this, as the housewives advise, it is enough to take a small piece of cloth, soak it in alcohol and begin to remove dirt. After the procedure, be sure to rinse the products in strong water and let them dry.
To remove heavy soiling, pour about 6-8 drops of alcohol into a bowl with two tablespoons of filtered or distilled water. Then stir the liquid and leave the jewelry in it for 30-45 minutes. Finally, rinse them under running water.
Cleansing with sweet water
Another, according to reviews, an easy way to get rid of minor darkening and pollution is the use of sweet water. To do this, take about 150-200 ml of water and 2 tablespoons of sugar. Heat water and pour sugar into it (until it is completely dissolved).
Turn off the fire and dip the decorations in the water and leave them there for a day. The next day, wash the items in water and dry with a cotton cloth.
