It is not uncommon for the shape or structure of the nails to deteriorate, causing us to feel embarrassed and making our appearance untidy. The base coat will hide visual imperfections, while strengthening the nail plate. A transparent design will look appropriate at any event and with any outfit. Just for starters, you should figure out in more detail how to properly align the nail plate with the base.
When is it necessary to level the surface of the nail?
Often, nails can have a damaged structure or initially deformed shape. They suffer greatly from unprofessional manicure, in particular from its improper removal. Sometimes the nail plate begins to exfoliate due to an insufficient amount of calcium in the body. Brittle nails will not allow you to make an elegant manicure while maintaining a natural length, as they break all the time.
Nails can be damaged due to physicalimpact. If you file or cut it incorrectly, the shape can become deformed and simply become ugly. But any physical imperfections are fairly easy to fix. There are several ways, for example, you can align the nail plate with a base. However, the base coat does not have to be used exclusively to correct imperfections. Beautiful well-shaped nails strengthen the base, making them visually more well-groomed and neat.
Description of gel polish and base
Gel polish quickly hardens, becoming very durable, when exposed to special UV or LED drying lamps. It acquires a solid structure that does not deteriorate over time. Gel polish lasts for two or more weeks without fading or cracking. Usually the base coat is applied just before the colored gel polish so that the final color lays down better. The color is even, and the nail is perfectly smooth. Therefore, pre-aligning the nail plate with the base is very important for a good result.
Transparent base has the ability to smooth out imperfections such as notches on the nail plate. However, it is important to figure out how to properly align the nail plate with a gel base.
An improperly applied coating will have the undesirable effect of giving the shape an excessive bulge.
The base can be not only transparent, but also camouflage: milky, pink, peach. The coating of medium density or very thick will be optimal, since liquid is not suitable for formationflat surface. It spreads a lot, it will be difficult to make the necessary shape with it.
Base Coat Benefits
Many are wondering how to align the nail plate with a base so that it looks not like a solution to a problem with nails, but like a regular manicure. The main advantage of the base coat is just its versatility. It can be applied not only as a preparatory layer for colored varnish. A transparent, evenly applied coating looks elegant and very attractive, regardless of the shape of the nails. Moreover, the absence of a bright manicure will hide slight flaws in the shape of the nail. And coating errors are less noticeable on clear coat, although it's best to avoid them.
Transparent natural manicure is suitable for a woman of any status and age. It will look appropriate on both a young girl and a respectable lady. The basic coat according to the dress code is combined with a strict office style, casual or evening look, looks unobtrusive and very stylish.
Processing the nail before coating
Before leveling the nail plate with a gel base, you should prepare the surface. So the coating will last longer, and the nail will look neater. First of all, you need to remove the cuticle. First you need to soften it with a special tool. It is impossible to make baths before manicure using gel materials, otherwise the effect will not last long. It is better to use a special remover.
Cuticlebecomes soft, supple, then it is shifted with an orange stick and cut off with nail scissors.
Next, the nails are treated with a buff with an abrasive coating, which removes the glossy film from the nail. It will also allow you to remove the layering without damaging the structure, so it is important not to press too hard. This treatment method, in other words, improves the adhesion of the nail to the varnish. Due to which it does not come off for so long and does not lose its properties. Additionally, you can go over the surface of the nail with a polishing file to smooth out the effect of the buff treatment. Before leveling the nail plate with the base, it is important not to forget one more important step - the primer. The nail is covered with a degreaser and then with a primer, which serves as the final stage of processing. This will remove moisture, dust and residues of other products from the nail plate.
Applying technique
A base coat can be applied over the primer. After applying each layer of the base, the hand is placed in a drying lamp. It is recommended to dry for two minutes. To create a better manicure, each nail should be worked out separately. That is, apply a coating on one finger, dry it, then proceed to another. The base should be applied in at least two layers, otherwise the effect will be practically not noticeable. With a brush, the varnish is applied in a fairly thin layer, in the direction from the center. The first layer is done in the most usual way.
Figure out how to align the nail plate with a rubber base,pretty simple. The rubber base has a thicker structure and better adheres to the nails. To create the most beautiful natural form, you will need to resort to a simple trick. In the middle, at the so-called apex point, a little higher (closer to the cuticle), a drop of the base is applied, only slightly stretched to the edges. The nail can be made convex, forming a longitudinal arch. For the best effect, after applying the base, it is recommended to turn the hand with the palm up so that a drop forms. The more liquid the base is applied, the thinner the layer should be (they can be made in quantity) and the further away from the cuticle should be.
If necessary, use a thin brush: smooth the drop so that it spreads evenly. Turn your hand over and immediately send it to the lamp so that the base polymerizes.
Tips for implementation
The shape is selected and created before the nail is processed, so as not to spoil the varnish coating later or create excess dust from filing. The file should be chosen with medium hardness (abrasiveness). After the edge should be processed with a polishing file.
After applying the base, you can check how even the coating turned out by examining the nail from different angles. An ordinary table lamp will also help with this. The hand will simply need to be rotated and held at various angles to make sure that the applied varnish coating is even.
After the alignment of the nail plate with the base is completed, if desired, you can apply a color coating on top or create a design with rhinestones and stickers. For applying base and basecolors use a wide flat brush, for fine patterns choose thinner, finer brushes.
The base is needed to form a flat surface, this material is not very resistant to mechanical stress. Therefore, when finished, cover your nails with top and dry it.