At the moment, there are a large number of tools that allow you to create a durable and beautiful manicure. To keep it as long as possible, you should use a gel polish finish. It is a tool that should complete the creation of a manicure. For strong adhesion between the varnish and the nail, ultraviolet rays should be used. A special lamp is sold for this purpose.
What is a finish gel?
As already mentioned, a similar gel is used to complete the nail extension procedure. It is necessary in order to maximally fix the nails. The main advantage of this tool is to increase the service life of the created nail and fix the design on it. In addition, the gel adds shine.
Finishing varnish is used for both acrylic and gel extensions. When using it, you do not need to polish the nail, and there is no need to apply a fixer. It is often used asbasics.
Gel extension can be two-phase, three-phase and single-phase. At the first stage, the material adheres to the nail. On the second, it is given shape. In the third stage, the nail is fixed and it will have to shine. Finishing gel takes an active part in all phases.
To choose the right varnish, you should take the choice responsibly. If the gel is of poor quality, then this will only spoil the work of the mater. The nails will shine yellow and will not look neat. Also, poor-quality gel can cause nails to crack and break off. It is important to use only trusted brands.
What are gels?
Gels may or may not have a sticky layer. Some models give a glossy glow, others - matte. As a rule, masters prefer to use those gels that do not have a sticky layer. They are easy to use, they are liquid. The applied layer hardens in 2-3 minutes. Also, you do not have to additionally remove the sticky layer. Before applying it, you do not need to degrease the nail. The yellow tint will not appear over time.
It is necessary to take into account the nuance that if 30% of the nail or more is occupied by a drawing, then it will not be possible to do with a finish gel without a sticky layer. To fix the design, it is better to use a transparent varnish. Some maters recommend taking a finish with a sticky surface. If you skip this step, the drawing will quickly become covered with cracks.
If the mater uses a gel with a sticky layer, then it can be removed only after the nail has cooled down. Then the drawing will shine. In addition, this approach providesresistance to mechanical damage. To avoid stains on the coating, you need to buy only high-quality gels.
Gels also have varieties. If the sticky layer is thick, then the varnish has a viscous consistency. The drying process in the lamp will take less than two minutes. Often such a gel is used to correct nail defects.
Matte finish gel should be applied in two layers. Each is dried for at least 2-3 minutes. Use it when working with both acrylic and gel, gel polish. The mother-of-pearl version has interspersed with various colors (gold, silver, blue, and so on). Separate topcoats are available for gel polishes. They have a sticky layer. Give extra strength.
What are top gels used for?
Top finish for gel polish is used quite often. It allows not only to make the nail more durable, but also adds gloss. The top coat is applied in a thick layer, unlike a base coat or regular gel polish. To dry the nail in a UV lamp, you should spend about 3 minutes. In an LED lamp, 30 seconds is enough. If the finish is not properly dried, then after a while the nail will lose its luster and spots will appear. Remove the sticky layer after drying.
Best gels
There are a huge number of coatings now. Many nail technicians get confused and can't find good nail gel finish options.
From inexpensive coatings, Irisk should be noted. This top does not have a sticky layer. It protects well from cracks and chipping. Excellent reviewsget gels from Kodi. Use them for both acrylic and gel nails. Gel from EzFlow provides shine and long-lasting wear of nails. It can be used not only when working with gel and acrylic, but also with fiber glass technology. The stability of the coating can be achieved thanks to the top from Lightbox. It gives shine and does not leave a sticky layer. Gels from Planet Nails are popular due to the fact that they do not yellow, perfectly seal the material, create a shine and provide excellent adhesion to the material.
Separately, you need to highlight the finishing gel from Avon. This coating can be used without base and fixer. You can dry it without an ultraviolet lamp. The manufacturer assures that the varnish will last a long time and will help if the girl has brittle and thinned nails.
Masters advise to purchase products only from trusted companies, especially not to buy gels "on tap". Thanks to the glossy and matte finish gel, you can increase the durability of nails up to 2 weeks.
Finishing gel cracking: why?
This problem is not uncommon, even competent and professional craftsmen face it. Cracks can appear with poor drying of the coating. The lamp should be checked to see if it is working. Sometimes the cause of this effect may be the application of too thick a layer of gel. Need to try a thinner finish.
Many cheap gels crack, turn yellow. This spoils the look of the manicure. If the vial is open, dust or other foreign matter may have entered the vial.particles. After drying, they give a negative effect and violate the integrity. It is best not to use the damaged gel, but to purchase a new one.
Applying technique
When applying the finish coat, you need to carefully cover the entire painted surface. We should not forget about the ends. If they are not treated, then after a while the gel will begin to peel off in these places. The top coat must be completely sealed.
If the gel has a sticky layer, it must be removed, otherwise the nails will be covered with dust. You need to wash either with a lint-free cloth soaked in a special liquid, or with a degreaser. Some of the available options are also designed to remove the dispersion layer.